document number: 93171 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 18-aug-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 hyperfast rectifier, 8 a fred pt ? vs-8e2tx06-e, vs-8e2tx06-m, vs-8E2TX06FP-E vishay semiconductors features ? hyperfast recovery time, extremely low q rr ? 175 c maximum operating junction temperature ? for pfc ccm operation ? true 2 pin package ? low forward voltage drop ? low leakage current ? fully isolated package (v ins = 2500 v rms ) ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition ? designed and qualified for industrial level description/applications state of the art hyperfast reco very rectifiers designed with optimized performance of forw ard voltage drop, hyperfast recovery time, and soft recovery. the planar structure and th e platinum doped life time control guarantee the best ov erall performance, ruggedness and reliability characteristics. these devices are intended for use in pfc boost stage in the ac-to-dc section of smps, inverters or as freewheeling diodes. their extremely optimized stored charge and low recovery current minimize the switch ing losses and reduce over dissipation in the switch ing element and snubbers. product summary package 2l to-220ac, 2l to-220 fp i f(av) 8 a v r 600 v v f at i f 3.2 v t rr (typ.) 13 ns t j max. 175 c diode variation single die 2l to-220ac 2l to-220 full-pak ba s e cathode 2 3 anode 1 cathode 2 anode 1 cathode v s -8e2tx06 v s -8e2tx06fp absolute maximum ratings parameter symbol test conditions values units peak repetitive reverse voltage v rrm 600 v average rectified forward current i f(av) t c = 129 c 8 a full-pak t c = 71 c non-repetitive peak surge current i fsm t j = 25 c 77 peak repetitive forward current i fm 16 operating junction and storage temperatures t j , t stg - 65 to 175 c electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test condition s min. typ. max. units breakdown voltage, blocking voltage v br , v r i r = 100 a 600 - - v forward voltage v f i f = 8 a - 2.5 3.2 i f = 8 a, t j = 150 c - 1.6 2.0 reverse leakage current i r v r = v r rated - 0.3 40 a t j = 150 c, v r = v r rated - 30 400 junction capacitance c t v r = 600 v - 6 - pf series inductance l s measured lead to lead 5 mm from package body - 8 - nh
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93171 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 18-aug-10 vs-8e2tx06-e, vs-8e2tx06-m, vs-8E2TX06FP-E vishay semiconductors hyperfast rectifier, 8 a fred pt ? dynamic recovery characteristics (t j = 25 c unless otherwise specified) parameter symbol test conditi ons min. typ. max. units reverse recovery time t rr i f = 1.0 a, di f /dt = 100 a/s, v r = 30 v - 13 18 ns i f = 8.0 a, di f /dt = 100 a/s, v r = 30 v - 14 23 t j = 25 c i f = 8 a di f /dt = 200 a/s v r = 390 v -16- t j = 125 c -35- i f = 8 a di f /dt = 600 a/s v r = 390 v -25- peak recovery current i rrm t j = 25 c i f = 8 a di f /dt = 200 a/s v r = 390 v -2.3- a t j = 125 c -3.8- i f = 8 a di f /dt = 600 a/s v r = 390 v -10- reverse recovery charge q rr t j = 25 c i f = 8 a di f /dt = 200 a/s v r = 390 v -16- nc t j = 125 c -62- i f = 8 a di f /dt = 600 a/s v r = 390 v - 131 - thermal - mechanical specifications parameter symbol test condition s min. typ. max. units maximum junction and storage temperature range t j , t stg - 65 - 175 c thermal resistance, junction to case r thjc -22.4 c/w full-pak - 5 5.5 thermal resistance, junction to am bient per leg r thja typical socket mount - - 70 typical thermal resistance, case to heatsink r thcs mounting surface, flat, smooth and greased -0.5- weight -2-g -0.07- oz. mounting torque 6 (5) - 12 (10) kgf cm (lbf in) marking device case style to-220 8e2tx06 case style to-220 full-pak 8e2tx06fp
document number: 93171 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 18-aug-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 vs-8e2tx06-e, vs-8e2tx06-m, vs-8E2TX06FP-E hyperfast rectifier, 8 a fred pt ? vishay semiconductors fig. 1 - typical forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics (to-220) i f - instantaneous forward current (a) v f - forward voltage drop (v) 0.2 0.4 0.6 1.0 1.4 0.8 1.2 1.6 1.8 0.1 1 10 100 93171_01 t j = 175 c t j = 150 c t j = 25 c i r - reverse current (ma) v r - reverse voltage (v) 0 1020304050 0.0001 0.001 0.01 0.1 1 10 100 1000 93171_02 t j = 125 c t j = 175 c t j = 150 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c c t - junction capacitance (pf) v r - reverse voltage (v) 0 100 200 400 500 300 600 1 100 10 93171_03 0.1 1 10 0.00001 93171_04 0.0001 0.001 0.01 0.1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 1 s ingle pul s e (thermal re s i s tance) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93171 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 18-aug-10 vs-8e2tx06-e, vs-8e2tx06-m, vs-8E2TX06FP-E vishay semiconductors hyperfast rectifier, 8 a fred pt ? fig. 5 - maximum thermal impedance z thjc characteristics (full-pak) fig. 6 - maximum allowable case temperature vs. average forward current (to-220) fig. 7 - maximum allowable case temperature vs. average forward current (full-pak) fig. 8 - forward power loss characteristics note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = rated v r 0.1 1 10 0.00001 93171_05 0.0001 0.001 0.01 0.1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 1 s ingle pul s e (thermal re s i s tance) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 allowable case temperature (c) i f(av) - average forward current (a) 8 6 4 210 12 0 150 170 180 110 130 140 160 120 93171_06 sq uare wave (d = 0.50) 80 % rated v r applied s ee note (1) dc allowable case temperature (c) i f(av) - average forward current (a) 8 6 4 210 12 0 110 150 170 30 70 90 130 50 93171_07 sq uare wave (d = 0.50) 80 % rated v r applied s ee note (1) dc average power loss (w) i f(av) - average forward current (a) 810 6 4 2 12 0 93171_08 20 25 0 10 15 5 rm s limit d = 0.01 d = 0.02 d = 0.05 d = 0.10 d = 0.20 d = 0.50 dc
document number: 93171 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 18-aug-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 5 vs-8e2tx06-e, vs-8e2tx06-m, vs-8E2TX06FP-E hyperfast rectifier, 8 a fred pt ? vishay semiconductors fig. 9 - typical reverse recovery time vs. di f /dt fig. 10 - typical stored charge vs. di f /dt fig. 11 - reverse recovery parameter test circuit fig. 12 - reverse recovery waveform and definitions t rr (ns) di f /dt (a/s) 100 93171_09 1000 10 40 30 20 i f = 8 a, t j = 25 c i f = 8 a, t j = 125 c q rr (nc) di f /dt (a/s) 100 93171_10 1000 10 40 20 25 30 35 15 i f = 8 a, t j = 25 c i f = 8 a, t j = 125 c irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve dened by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93171 6 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 18-aug-10 vs-8e2tx06-e, vs-8e2tx06-m, vs-8E2TX06FP-E vishay semiconductors hyperfast rectifier, 8 a fred pt ? ordering information table 2 - current rating (8 = 8 a) 1 - vishay semiconductors product suffix 4 - 2 = true 2 pin package 5 - t = to-220 3 - circuit configuration: e = single diode 6 - x = hyperfast recovery time 7 - voltage code (06 = 600 v) - environmental digit: 9 -e = rohs compliant and terminations lead (pb)-free -m = halogen-free, rohs compliant and terminations lead (pb)-free - 8 none = to-220 fp = full-pak device code 5 1 3 2 4 6 7 8 9 vs- 8 e 2 t x 06 fp -e ordering information (example) preferred p/n quantity per tube minimum order quantity packaging description vs-8e2tx06-e 50 1000 antistatic plastic tubes vs-8e2tx06-m 50 1000 antistatic plastic tubes vs-8E2TX06FP-E 50 1000 ant istatic plastic tubes links to related documents dimensions to-220ac www.vishay.com/doc?95259 to-220 full-pak www.vishay.com/doc?95260 part marking information to-220ac www.vishay.com/doc?95391 to-220 full-pak www.vishay.com/doc?95392 packaging information www.vishay.com/doc?95388
document number: 95259 for technical questi ons concerning discrete products, contact: diodestech@vishay.com www.vishay.com revision: 21-jan-10 for technical questi ons concerning modul e products, contact: indmodules@vishay.com 1 true 2 pin to-220 outline dimensions vishay high power products dimensions in millimeters and inches notes (1) lead dimension and fini sh uncontrolled in l 1 ? these dimensions are within a llowable dimens ions of jedec to-220ab rev. j outline dated 3-24-87 ? controling dimension: inch e a f te r m . 4 e d l 0.150" ref. 0.002" 0.05 mm h 1 ? p q b 1 l 1 b j 1 c 12 ? 2.0 mm ref. 60 45 b a symbol millimeters inches min. max. min. max. a 4.32 4.57 0.170 0.180 b 0.71 0.91 0.028 0.036 b 1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 d 14.99 15.49 0.590 0.610 e 10.04 10.41 0.395 0.410 e 5.08 bsc 0.200 bsc f 1.22 1.37 0.048 0.054 h 1 5.97 6.47 0.235 0.255 j 1 2.54 2.79 0.100 0.110 l 13.47 13.97 0.530 0.550 l 1 (1) 3.31 3.81 0.130 0.150 ? p 3.79 3.88 0.149 0.153 q 2.60 2.84 0.102 0.112
document number: 95260 for technical questi ons concerning discrete products, contact: diodestech@vishay.com www.vishay.com revision: 22-jan-10 for technical questi ons concerning modul e products, contact: indmodules@vishay.com 1 true 2 pin to-220 full-pak outline dimensions vishay high power products dimensions in millimeters and inches ? q e a f e l h 1 c j 1 b d l 1 q 2 q 1 b 1 symbol millimeters inches min. max. min. max. a 4.53 4.93 0.178 0.194 b 0.71 0.91 0.028 0.036 b 1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 d 15.67 16.07 0.617 0.633 e 9.96 10.36 0.392 0.408 e 5.08 typical 0.200 typical f 2.34 2.74 0.092 0.107 h 1 6.50 6.90 0.256 0.272 j 1 2.56 2.96 0.101 0.117 l 12.78 13.18 0.503 0.519 l 1 2.23 2.63 0.088 0.104 ? q 2.98 3.38 0.117 0.133 q 1 3.10 3.50 0.122 0.138 q 2 14.80 15.20 0.583 0.598 0 5 0 5
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
